Panasonic KX-TGA101C Installation Manual page 3

TGA101C(e).auto.fm Page 3 Wednesday, March 7, 2007 2:49 PM
Battery installation
1
Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
2
Insert the batteries negative (T) end
first. Close the handset cover.
Important:
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Install the batteries in proper order
(S, T), matching the correct polarity.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the charger for 7
hours before initial use.
Note:
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L To ensure that the batteries charge
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Panasonic battery performance
Operation Operating time
While in use Up to 17 hours
(talking)
While not in use Up to 11 days
(standby)
Note:
L The handset can be left on the
charger without any ill effect on the
batteries.
L The battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the charger and
let charge for 7 hours.
Charge
contacts
3