Maximum Intermodulation Distortion if instantaneous 240 Volts, 50/60Hz at 1.8 amps peak output per channel does not exceed twice the rated Note: Refer to the right side panel of the MC275 for the correct voltage. output, for any combination of frequencies from 20Hz to 20,000Hz, with both channels operating is 0.5%...
MC275 PARTS LIST Ref. No. Description Part No. Ref. No. Description Part No. INTERCONNECT FUSE 2A 250V SLO-BLO 5X20 IEC 089123 FUSE 4A 250V SLO-BLO 5X20 IEC 089135 FUSE 2A 250V SLO-BLO 5X20 IEC 089123 CHOKE FILTER 0.5H 800MA SLOTS...
Page 10
PARTS LIST con’t Ref. No. Description Part No. Ref. No. Description Part No. RES MF 100 OHM 1% 1/4W 144568 RES MO 100K 5% 2W 144698 RES MF 100 OHM 1% 1/4W 144568 RES MO 100K 5% 2W 144698 RES MF 8.25K 1% 1/4W 144549 RES MO 100K 5% 2W 144698...
MC275 REPACKING INSTRUCTIONS STEREO POWER AMPLIFIER STARTING WITH SERIAL NO. WV1536 SERVICE MANUAL The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated, who reserve the right to improve design without notice. Because of the constant upgrading of McIntosh products’ circuitry and components, the Company cannot insure, and does not warrant, the accuracy of the within schematic material, which is intended for information only.