Designating The Default Gateway; Dial Settings Dialog Box Fields - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Custom Network Interface Settings
Table 5-5. Dial Settings Dialog Box Fields
Field
Dial
Timeout If Not Connected In
Redial After Timing Out
Redial After Carrier Is Lost
Signal When Connected
Open Log When Connecting
Designating the Default
Gateway
Use Default Gateway... to specify which gateway (router)
should receive communication destined for addresses in an
unknown subnet. Refer to the NEWT TCP/IP for Windows
Installation and User's Guide.
5-12
Issue 2 December 1996
Description
Telephone number to use when
dialing.
Number of seconds to wait for
connection before timing out.
Redial after a timeout occurs.
Redial after the carrier is lost.
Signal when connected.
Open a log when connecting.