Sony NEX-3 Instruction Manual page 227

No images
• There is no image on the memory card.
Image protected
• You tried to delete protected images.
Unable to print.
• You tried to mark RAW images with a DPOF mark.
Camera overheating. Allow it to cool.
• The camera has become hot because you have been shooting continuously. Turn the power off. Cool
the camera and wait until the camera is ready to shoot again.
• Since you have recorded movies for a long time, the camera temperature has risen. Stop recording
movies.
• The SteadyShot function does not work. You can continue to shoot but the SteadyShot function will
not work. Turn the camera off and on. If this icon does not disappear, consult your Sony dealer or
local authorized Sony service facility.
• The number of images exceeds that for which date management in a database file by the camera is
possible.
• Unable to register to the database file. Import all the images to a computer using "PMB" and recover
the memory card.
Camera Error
System Error
• Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently,
consult your Sony dealer or local authorized Sony service facility.
Image Database File error.
• There is something wrong occurred in the Image Database File. Select [Setup] t [Recover Image
DB] t [OK].
Image Database File error. Recover?
• You cannot record or play back AVCHD format movies because the Image Database File is damaged.
Follow the on-screen instructions to recover data.
Recording is unavailable in this movie format.
• Set [File Format] to [MP4].
GB
144
Continued r