Adjusting The Brightness Of Still Images (Exposure Compensation); Using The Self-Timer - Sony NEX-3 Instruction Manual

Adjusting the brightness of still images
(Exposure compensation)
You can adjust the exposure in 1/3 EV steps in a range of -2.0 EV to +2.0 EV.
1
Press
~
(Exposure Camp.)
on the control wheel.
2
Turn the control wheel to select the desired value, and
press the center.
When the image is too bright, set [Exposure Comp.] toward -.
When the image is too dark, set [Exposure Comp.] toward +.
c
CJ)
:J
<0
Using the self-timer
1
Press
~
/
Q
(Drive Mode) on
the control wheel.
.....
:::J'"
CD
"""
CD
()
o
a.
:J
<0
-
C
:J
()
.....
o'
:J
CJ)
2
Turn the control wheel to select
~
(Self-timer).
Press [Option], then turn the control wheel to select the
desired mode and press the center.
~o
(Self-timer: 10 Sec): Sets the 10-second delay self-timer. Use this
when you want to include yourself in the picture.
To cancel the timer, press
~
/ Q!J again.
When you press the shutter button, the self-timer lamp flashes and beeps
until the shutter operates.
~2 (Self-timer: 2 Sec): Sets the 2-second delay self-timer. You can
prevent blur caused by camera shake that occurs when the shutter button
is pressed.
3
GB
- - - - - - - - - - - - - - 3 7