Sony NEX-3 Instruction Manual page 224

Memory card
Cannot insert a memory card.
• Insertion direction of the memory card is wrong. Insert it in the correct direction.
Cannot record on a memory card.
• The memory card is full. Delete unnecessary images (pages 28, 76).
• An unusable memory card is inserted.
Formatted the memory card by mistake.
• All the data on the memory card is deleted by formatting. You cannot restore it.
Printing
Cannot print images.
• RAW images cannot be printed. To print RAW images first, convert them to JPEG images using
"Image Data Converter SR" on the supplied CD-ROM.
The color of the image is strange.
• When you print the images recorded in Adobe RGB mode using sRGB printers that are not
compatible with Adobe RGB (DCF2.0/Exif2.21 or later), the images are printed at a lower saturation.
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
Especially when you print an image shot with the aspect ratio set to [16:9], the lateral end of the image
may be cut off.
• When printing images using your own printer, cancel the trimming or borderless settings. Consult the
printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a photo printing service shop, ask the shop whether they can print the
images without cutting off both edges.
Cannot print images with the date.
• Using "PMB," you can print images with date.
• The camera does not have a feature for superimposing dates on images. However, because the images
shot with the camera include information on the recording date, you can print images with the date
superimposed if the printer or the software can recognize Exif information. For compatibility with
Exif information, consult the manufacturer of the printer or the software.
• When you print images at a shop, images can be printed with the date if you ask them to do so.
Others
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using
it.
GB
141
Continued r