Riedel BP-2002 Operating Instructions Manual
Riedel BP-2002 Operating Instructions Manual

Riedel BP-2002 Operating Instructions Manual

Rpl 2000 2-channel beltpack

Advertisement

Quick Links

BP-2002
RPL 2000 2-Channel Beltpack

Operating Instructions

interstage
Phistersvej 31, 2900 Hellerup, Danmark
Telefon 3946 0000, fax 3946 0040
www.interstage.dk
- pro audio with a smile
RIEDEL
RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29
Page 1 of 11
Röttgen 8, D-42109 Wuppertal,
Alterations reserved
Tel. +49 (0) 202 / 270 370

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BP-2002 and is the answer not in the manual?

Questions and answers

Summary of Contents for Riedel BP-2002

  • Page 1: Operating Instructions

    BP-2002 RPL 2000 2-Channel Beltpack Operating Instructions interstage Phistersvej 31, 2900 Hellerup, Danmark Telefon 3946 0000, fax 3946 0040 www.interstage.dk - pro audio with a smile RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 1 of 11 Röttgen 8, D-42109 Wuppertal, Alterations reserved...
  • Page 2: Table Of Contents

    2 Setting up ....................................3 2.2 Front view ........................................ 3 2.3 Rear view......................................... 4 2.4 Control elements and connectors..............................4 2.5 Connecting the beltpack to a Riedel Party Line (RPL)......................... 4 3 Operation ....................................5 3.1 Talk..........................................5 3.1.1 Talk key properties..................................5 3.1.2 Talking to intercom channels ..............................
  • Page 3: General

    Apart from the call light, the beltpack also features an S-CALL button. With the BP-2002 you can now also talk to the radio users or switch to the paging system for announcements directly from the beltpack.
  • Page 4: Rear View

    2.4 Control elements and connectors The BP-2002 is a 2-channel beltpack and therefore has two talk keys and two volume controls. The talk keys are labelled “I” and “II“. The volume controls are allocated to the relevant talk keys and channels.
  • Page 5: Operation

    Talk function preselected and sent to it. The call light illuminates on all beltpacks in the party line unless it has been suppressed by beltpack-setup. Your own call light will also be illuminated for the duration of the call. RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 5 of 11 Röttgen 8, D-42109 Wuppertal,...
  • Page 6: Receiving A Call Light Signal

    On the back of the unit are two sidetone trimmers, one above the other. The top trimmer is responsible for setting the talk-back (sidetone) for Channel I. The trimmer underneath adjusts the sidetone of Channel II. RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 6 of 11 Röttgen 8, D-42109 Wuppertal,...
  • Page 7: Mic Kill

    4.1 Programmable options If the intercom supply is applied, the BP-2002 can be programmed to special operating conditions in which the unit can be used. If the intercom power supply is switched off or the unit is unplugged, the programming remains in memory.
  • Page 8: Programming Modes

    LED. If all settings are made, by pressing Talk key I, you exit Service mode and the settings are saved. Saving and exiting are possible at any time. RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 8 of 11 Röttgen 8, D-42109 Wuppertal,...
  • Page 9: Connecting Options

    Audio channel A 5.2.2 Intercom line connectors in Clear-Com-Mode 3-pin XLR male and XLR female Definition Ground +30 VDC Audio RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 9 of 11 Röttgen 8, D-42109 Wuppertal, Alterations reserved Tel. +49 (0) 202 / 270 370...
  • Page 10: Technical Data

    > 50 Ω (recommended 600 Ω for low power consumption) Headset Impedance: Gain: 32dB 6.4 Power Consumption: BP-2002 beltpack: 22 mA, avg. in two-channel mode, channels activated RIEDEL RPL_EN_BP-2002e-Rev2.1.doc: 2 12.12.2002 11:29 Page 10 of 11 Röttgen 8, D-42109 Wuppertal, Alterations reserved Tel.
  • Page 11: Warranty

    The warranty is null and void if repairs or modifications are made on the equipment by the purchaser or a third party not authorized by RIEDEL Communications GmbH. Damages resulting from inappropriate use or handling, incorrect installation or storage, or inappropriate connection are not covered by the warranty.

Table of Contents