Operating The Wiper/Washer System (Cab Version) - Kubota U27-4 Operating Instructions Manual

Hide thumbs Also See for U27-4:
Table of Contents

Advertisement

Operating the wiper/washer system (cab version)

All cab models are equipped with a wiper/washer system.
Risk of personal injury!
When you turn the wiper on while the windscreen is opened, it slides out of the mounting on the cabin
STOP
frame and can cause impact inside the cab. There is a risk of injury when the wiper thereby hits the
operator's face.
- Do not turn on the wiper switch while the windscreen is open.
Switching on the windscreen wiper
The starter switch is in the RUN position.
Press the switch (1) to the WIPER/WASHER position.
The wiper operates as long as the switch remains in this position.
To switch off, press the switch (1) to the OFF position.
In extremely cold weather conditions, make sure the wiper rubber does not stick to the window. This
can damage the wiper rubber or the wiper motor.
Only switch on the wiper when the window glass is wet. If necessary, switch on the washer system
first.
To turn on the washer system
The washer system can be operated irrespective of whether the
wiper is on or off.
If the wiper is on:
Press the switch (1) to the WIPER/WASHER position again
and hold it down.
If the wiper is off:
Press the switch (1) to the OFF position and hold it down.
The washer system runs for as long as the switch is held down.
Do not operate the washer system if its reservoir is empty as running dry could damage the pump.
90
Operation
1
1
RH418-8135-3
07/2015

Advertisement

Table of Contents
loading

Table of Contents