Power Supply - Seca 764 Instruction Manual

Power supply

The power supply must come from the
supplied AC adaptor.
The connector for the AC adaptor is lo-
cated under the rod.
5. Setting up and aligning the scales
– Place the scales on a level surface.
– Align the scales by removing the foot
screws. The air bubble in the spirit lev-
el must be right in the centre of the
circle . The scales must stand secure-
ly on the floor on all four feet.
Important!
The alignment of the base of the scale
must be checked and corrected if nec-
essary every time the location of the
scale is changed.
20