Charging The Projector; Connecting The Projector - Brookstone Keychain Projector Manual

CHARGING THE PROJECTOR

1. I nsert one end of the MICRO USB CHARGING
CABLE into the projector and the other end
into your computer or a USB adapter (5V, 1A or
above); (not included). The projector will be fully
charged in approximately 2 hours.
2. The CHARGING LED INDICATOR is red while
the projector is charging. When the projector
is fully charged, the CHARGING LED
INDICATOR turns green. For first time use, fully
charge the projector.
3. When the projector's battery is low, the
CHARGING LED INDICATOR will flash red.
12

CONNECTING THE PROJECTOR

T
he projector can be connected to smartphones,
tablets, laptops, media streamers, and digital cameras
via HDMI
®
I
nsert one end of the MICRO HDMI
projector and the other end into the source device.
Notes:
• Some devices will automatically mirror the
display from the source device in the
projected image. Other devices may not have
this ability. Devices that are not able to mirror
can still be used with the projector to project
videos.
• When connecting to a laptop or computer, a
multiple display option must be enabled in
your laptop's or computer's display settings.
.
®
CABLE into the
13