Mazda 2 2015 Owner's Manual page 626

Item
Active
driving
display
Refer to
Turn-by-
Active
Turn (TBT)
Driving
Display
on page
4-35 .
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
*5 Available only in display from the centre display.
Feature
Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed.
Personalisation Features
Factory Available
Setting Settings
On On/Off
position is set to intermittent operation.
Specifi cations
Settings change method
Refer to
Active
—
Driving
Display
on page
4-35 .
9–19