Mazda 2 2015 Owner's Manual page 404

How to confi rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed fi rst is the
device which is currently linked.
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP " mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the fi rst device among the
paired devices is displayed.
4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
®
audio
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of paired devices can
be displayed. If only one device is
paired, only the name for this device is
displayed.
5. If a selection other than " GO BACK "
is made and the audio control dial is
pressed, " SURE ? NO " is displayed.
6. Rotate the audio control dial clockwise
and switch the display to " SURE ?
YES ".
NOTE
The display changes as follows
depending on whether the audio
control dial is rotated clockwise or
anticlockwise.
-Clockwise: " SURE ? YES " displayed
-Anticlockwise: " SURE ? NO "
displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select " GO BACK " and press the audio
control dial to return to the " PAIR
DELETE " display.
8. " PAIR DELETED " is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
Interior Features
®
Bluetooth
5–103