Mazda 2 2015 Owner's Manual page 515

Maintenance and Care
Owner Maintenance
3. Turn the socket and bulb assembly
anticlockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
Number plate lights
Saloon
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Pull the centre of each plastic retainer
and remove the retainers.
3. Peel back the boot lid trim.
4. Turn the socket and bulb assembly
anticlockwise and remove it.
6–58
Removal
Installation
5. Disconnect the bulb from the socket.
6. Install the new bulb in the reverse order
of the removal procedure.
Hatchback
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Wrap a fl athead screwdriver with a soft
cloth to prevent damage to the light
unit.
3. Insert a fl athead screwdriver into the
position shown in the fi gure and pull
the light unit outward.