Mazda CX-9 2016 Owner's Manual page 108

Hide thumbs Also See for CX-9 2016:

Table of Contents

Before Driving

Doors and Locks

Sensors are installed on both ends of

the power liftgate. Be careful not to

allow the sensors to be scratched or

damaged by sharp objects, otherwise

the liftgate may no longer open/close

automatically. In addition, if the sensor

is damaged while the liftgate is closing

automatically, the system will stop.

The jam-safe equipment does not activate

during easy closure operation when the

power liftgate is between the near-shut

position and fully closed position.

When the power liftgate is moving in the

open/close direction and an obstruction is

detected, the beep sound will be heard and

the liftgate moves in the reverse direction

Liftgate easy closure

The Easy Closure system automatically

closes the liftgate completely from the

near-shut position.

This system also operates when the liftgate

is closed manually.

When closing a liftgate, always keep

hands and fi ngers away from the

Placing hands or fi ngers around a

liftgate is dangerous because the

liftgate closes automatically from the

near-shut position, which could cause

hands and fi ngers to be pinched and

If the electric liftgate opener is pressed

while the easy closure function is

operating, the liftgate can be opened.

If the liftgate is opened/closed

repeatedly in a short period of time, the

easy closure function may not operate.

Wait for about 2 seconds and then try

Chapters

Table of Contents