Electrical Data; Units Without Electric Heater; Accessory Electric Heaters; Electric Heater Internal Protection - Bryant fe4anf005 Installation Instructions Manual
* Use copper wire only to connect unit. If other than uncoated (nonplated) 75°F ambient, copper wire (solid wire for 10 AWG and smaller, stranded wire for
larger than 10 AWG) is used consult applicable tables of the National Electric Code (ANSI/NFPA 70).
NOTE: If branch circuit wire length exceeds 100 ft, consult NEC 210-19a to determine maximum wire length. Use 2% voltage drop.
FLA — Full Load Amps
HEATER
KW
PART NO.
@ 240V
KFCEH0501N05
5
KFCEH0901N10
10
KFCEH3001F15
15
KFCEH3201F20
20
KFCEH2901N09
9
KFCEH1601315
15
KFCEH3401F24
24
KFCEH3501F30
30
KFCEH2401C05
5
KFCEH2601C10
10
KFCEH3101C15
15
KFCEH3301C20
20
* Field convertable to 3 phase.
† These heaters field convertable to single phase.
‡ Blower motor heat not included.
** Single point wiring kit required for these heaters in Canada.