Samsung AM009FN4DCH User Manual page 32

Setting an indoor unit address and installation option
Changing a particular option
You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
controller
display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication and
details
0
When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
When changing a digit of indoor unit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
If you are using heat pump model, mixed operation mode (two or more indoor units operating in different
operation mode simultaneously) is not available when the indoor units are connected to same outdoor
CAUTION
unit. If you set the master indoor unit with a remote controller, outdoor unit will operate in the mode which
was set in the master indoor unit.
32
SEG2 SEG3
The option mode
MODE
you want to change
Option
D
mode
SEG1 SEG2
PAGE MODE
0 D
SEG4
The tens' digit of an The unit digit of an
option SEG you will option SEG you will
change
Tens' digit Unit digit of
1~6 0~9
of SEG
SEG3 SEG4
The option The tens' digit
mode you of an option
want to SEG you will
change change
2 1
SEG5 SEG6
The changed value
change
The
0~9 changed 0~F
SEG
value
SEG5 SEG6
The unit digit
of an option The changed
SEG you will value
change
7 1