Listening To The Radio - Sanyo GCD2000 Instruction Manual

LISTENING TO THE RADIO
Preparation
1. Press the POWER switch to ON.
Automatic or Manual tuning operation:
1.
2.
3.
4.,
Press the TUNER functio; button.
Press the BAND button to select the desired radio band.
The selected band will be displayed: "FM 1", "FM 2" or
"AM".
a) For automatic tuning, press the FM/TUNE MODE
button to select the AUTO position. (The AUTO in-
dicator will appear in the display.) Press either the
"UP" or "DOWN" TUNING button, The unit will auto-
matically tune in a station. Press either the "UP" or
"DOWN" TUNING button again to receive the next
broadcast station, In the automatic tuning mode, the
unit may not stop on distant or weak signal stations,
b) For manual tuning, press the FM/TUNE MODE but-
ton to select the manual position. (The AUTO indi-
cator will go off.) Press either the "UP" or "DOWN"
TUNING button until you have reached the desired
station.
NOTES:
- For receiving an FM stereo broadcast, set the FM/
TUNE MODE button to the AUTO position. The unit
will automatically switch to mono or stereo as you
tune in different stations. The FM stereo (ST) indica-
torwill appear in the display when a stereo broadcast
is being received.
- For receiving a weak-signal FM stereo broadcast, set
the FMnUNE MODE button to the manual position.
The MONO indicator will appear in the display.
Adjust the VOLUME and other controls as desired.
To preset stations and operate preset tuning:
The unit has an electronic memory circuit which is capable
of memorizing a total of 36 stations (e.g. 24 FM and 12AM
stations).
1.
2.
3.
4.
5.
6.
7,
8.
Press the TUNER function button,
Select the desired radio band with the BAND button.
Tune in a desired station.
Press the MEMORY button. The PROG. indicator will
flash,
Press the '(UP" or "DOWN" PRESET button to select
the desired preset number.
Press the MEMORY button. The PROG. indicator will go
off. The station is now preset.
Example:
p12 FM 1 88.1
MHz
AUTO
12
To preset the other stations, follow the same procedure
outlined in Steps 2-6 above.
Now, you can
receive a desired AM or FM broadcast
station quickly and accurately, Select the desired band,
press and release the "UP" or DOWN" PRESET button.
The preset station will be heard.
l—
d'
1
NOTES:
- 12 stations can be preset on each Band.
- Once you have preset the desired stations, they will be
held in memory even if the unit is turned off.
- If the power cord is disconnected from the wall outlet, or
if a power failure occurs, the tuning memory will be
erased. Preset new stations as described above.
-11-