Parking - Honda SPORTRAX 250X 2009 Owner's Manual

０８／０８／０７ ２０：０６：００ ３１ＨＮ６６８０ ００７９

Parking

1. Look for level parking area. Make sure the ground surface is firm.
2. After bringing your ATV to a stop, hold the brakes while you shift
into neutral.
3. Set the parking brake.
4. Turn the ignition switch OFF (
5. If you're finished riding for the day, turn the fuel valve OFF.
If it is necessary to start the engine when your ATV in gear and is
stopped on a grade, rock the vehicle back and forth to allow shifting the
transmission into neutral.
Parking on a Steep Incline or a Loose or Slippery Surface
If you must park your ATV on a steep incline or loose or slippery
surface, use the following procedure:
1. While holding the brakes, set the parking brake.
2. Turn the ignition switch OFF (
3. If the ATV begins to move, either while sitting on it or after you
dismount, find a better parking location.
4. If rocks or other objects are available, you can block the wheels as
shown for additional security.
70 Basic Operation & Riding
).
) and release the brakes.