Debugging Menu - Pioneer DVR-7000 Service Manual

DVR-7000

3.1.3 DEBUGGING MENU

For operation, use the GGF1067 remote control unit for service.
The Debug menu is a main menu from which to select any of 11 mode menus, classified by rough category, such as recording
system and VR playback system. The mode menus also have subscreens if there are many items.
The Debug menu during playback of a DVD-V (including video mode), CD, or VCD is almost the same as that of the DV-737
(see Mode Menu 10).
How to Enter the Debug Menu
How to Exit the Debug Menu
How to Advance the Mode Menu : Press the [DISP] key.
How to Advance the Subscreen in a Mode Menu : Press the [DIG/ANA] key.
Note 1 : If you press the [DISP] key on the final mode menu, the display will return to Mode Menu 1.
Note 2 : Pressing the [DIG/ANA] key repeatedly will change the subscreens within the same mode cyclically. To change mode
menus, press the [DISP] key.
Description of Each Mode
1. Mode Menu 1 [Version information, etc.]
Subscreen 1
1 DVR-7000 /KU
2
SYSCON : RELEASE_1 1 2
3
R e v : 1. 6 1 0 9. 2. 2 2 6. 2. 4
4 TUFLCON
: 1. 5 2 0 0
5
DRIVE : PIONEER
DVD–RW
1. 6 1 C
A E T 0 0 0 0 2 2 4 J P
6
DEVICE : AV1=ES6. 0
7
REGION : 1
1 Model name/destination
2
Version of the recorder software
3
Revision No. of the system control computer software
4 Version No. of the tuner microcomputer, result of confirmation on combination between the tuner microcomputer and the
system control computer
5 Information on the built-in drive (Name of the manufacturer, model name of unit into which the drive is built, version No., CPU
model name, serial No., result of confirmation of combination with the system control computer*2
6 Version No. of AV1
7 Region No.
Subscreen 2
1
ERR RATE : x. x x E–x /
1
Error rate during playback in VR mode (Averaging value for last 10VOBUs),
Display the rotation ratio of the drive (/: Normal speed, No display: Double speed)
Note: Be sure to start playback after displaying this screen.
: Press [ESC] + [DISP] keys in order while no GUI is displayed.
: Press the [ESC] key.
$
OK
DVR–7 0 0 0
7 9 1 1 OK
OK
OK: Correct combination
NG+: Version of the tuner microcomputer too high
NG-: Version of the tuner microcomputer is too old
OK: Correct combination
NG+: Version of the drive too high
NG-: Version of the drive is too old
OK: Serial No. of the drive is Registered
NG: Serial No. of the drive is not Registered
11