Connecting The Power Supply Unit - Partner Tech International RP-800 User Manual

Connecting the Power Supply Unit

WARNING: Before connecting the printer to power, make sure
the printer power is switched off
cord is unplugged from the electric outlet. Failure to do so may
result in damage to the power supply unit and the printer.
24V
1
Connect the female connector of the power cord to the power
inlet of the AC adapter.
2
Insert the DC output connector of the adapter (with the flat side
facing down) into the power socket of the printer.
3
Plug the power cord into an electric outlet.
NOTE: Plug type and electrical outlet vary by country/region.
RS232
2
1
and the power
( ⍄ page 15)
Connecting the Power Supply Unit Connecting to a POS System
3
13