Set Up Sms Alert Messages - NETGEAR LB1110 User Manual

Set Up SMS Alert Messages

You can set up the modem to automatically send SMS alert messages (or in short, alerts) if particular
conditions occur. The modem can send such messages to up to three devices. SMS charges might apply.
The format of an SMS alert message is as follows: [XXX] [YYYYYY] [ZZZZZZZZZZZZZ] [Text]
• [XXX] is a message ID with a number from 0 to 999. For example, 003.
• [YYYYYY] is the model number, which consists of 6 characters. For example, LB1110.
• [ZZZZZZZZZZZZZ] is the factory serial number (FSN), which consists of 13 characters. For example,
4PX123AB1234C.
• [Text] is the actual message content. For example, software update is available.
An example of an SMS alerts message is: 003 LB1110 4PX123AB1234C software update is available.
To set up SMS alerts:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The Dashboard page displays.
Note If you did not select the Remember me check box when you logged in previously, a
limited Dashboard page displays. In the Sign In field, enter the modem password
and click the Sign In button. The default password is password (case-sensitive).
3. Select Settings > General > Alerts.
By default, the On radio button is selected and the capability to send SMS alerts is enabled.
Manage the Modem and Monitor Usage and the Network
LTE Modem LB1110 and LB1111
67