Disable Vpn Pass-Through - NETGEAR LB1110 User Manual

To enable the DMZ when the modem functions in Router mode and to designate a computer
to receive incoming traffic:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The Dashboard page displays.
Note If you did not select the Remember me check box when you logged in previously, a
limited Dashboard page displays. In the Sign In field, enter the modem password
and click the Sign In button. The default password is password (case-sensitive).
3. Select Settings > Advanced > LAN.
The LAN page displays.
4. Scroll down to the bottom of the page.
5. In the DMZ section, next to DMZ Enabled, select the On radio button.
The Submit button and the IP Address field display after you select the radio button.
By default, the Off radio button is selected and the DMZ server is disabled.
6. In the DMZ Address field, enter the IP address of the computer to which you want all data sent.
By default, the IP address for the DMZ computer is 192.168.5.4.
7. Click the Submit button.
Your settings are saved and the modem restarts.

Disable VPN Pass-Through

Note You can disable VPN pass-through only when the modem functions in Router mode
(see Manage Router Mode and Bridge Mode
If a device that is connected to the modem functions as a VPN client for a VPN endpoint on the Internet,
encrypted VPN packets are sent to the modem. Because the modem filters the encrypted packets through
Network Address Translation (NAT), the packets become invalid if you do not enable VPN pass-through.
By default, when the modem functions in Router mode, VPN pass-through is enabled.
Situations might occur in which you want to disable VPN pass-through.
To disable VPN pass-through when the modem functions in Router mode:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
LTE Modem LB1110 and LB1111
Manage the Modem LAN Settings
27
on page 22).