Table of Contents
Advertisement
Power on
Press the ON/OFF button to turn on the camera.
1
1
• When the camera is turned on, the monitor will turn on.
• To turn off the camera, press the ON/OFF button again.
Camera sleep operation
If no operations are performed for a minute, the camera enters "sleep" (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button, q button, etc.). The camera will turn off automatically if
left in sleep mode for 5 minutes. Turn the camera on again before use.
16 EN
ON/OFF button
Monitor
Battery level
; (green): Camera ready to shoot.
(Displayed for about ten seconds after
the camera is turned on.)
: (green): Low battery
] (blinks red): Charge the battery.
Wi-Fi
ISO-A
200
250 F5.6
250
01:02:03
01:02:03
38
38
Advertisement
Table of Contents
