Linksys WMP54G Quick Installation Manual page 11

Security - The status of the wireless
security feature is displayed here.
Authentication - This is your wireless net-
work's authentication method.
IP Address - The IP Address of the
Adapter is displayed here.
Subnet Mask - The Subnet Mask of the
Adapter is shown here.
More Information
Default Gateway - The Default Gate-
Wireless Network Status
way address of the Adapter is dis-
played here.
DNS - This is the DNS address of the
Adapter.
DHCP Client - This displays the
Adapter's status as a DHCP client.
MAC Address- The MAC address of the
wireless network's access point or wire-
less router is shown here.
Cisco AP IP - This displays the Cisco AP
IP Address when LEAP wireless security is
used.
Signal Strength - The Signal Strength
bar indicates the signal strength.
Link Quality - The Link Quality bar indi-
cates the quality of the wireless network
connection.
Click Back to return to the initial Link
Information screen. Click Statistics to
go to the Wireless Network Statistics
screen. Click Save to Profile to save the
currently active connection settings to
a profile.
11