Linksys WMP54G User Manual

®
A Division of Cisco Systems, Inc.

Package Contents

• Wireless-G PCI Adapter
• One Setup CD-ROM
• One User Guide on CD-ROM
• Quick Installation Guide
2.4
GHz
Wireless-G
802.11g
USB Network Adapter
Wireless
Model No.
WMP54G
Model No.
1
Begin Installation
IMPORTANT: Do not connect the Adapter to Your PC
until you are instructed to do so in Step 2 or the
Adapter will not install correctly.
The USB Network Adapter is installed
and set up using the Setup Wizard
that comes on the CD enclosed.
A
To begin, insert the Setup
Wizard CD-ROM into your CD-
ROM drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear.
B
To install the Adapter, click
Click Here to Start on the
Welcome screen.
C
After reading the License
Agreement, click Next to
continue the installation and
Windows will begin copying the
files onto your PC.
D
The Setup Wizard will now
prompt you to install the
Adapter into your PC. Click
Next and your PC will power
down.
Proceed to Step 2.
Quick Installation
2
IMPORTANT: Make sure to
turn off the power to your
PC before opening the
case to prevent possible
electrical shock to you or
damage to the PC.
A
Before connecting the PCI
Adapter to your PC, make sure
that your desktop PC is pow-
ered down.
B
Open your PC case and
locate an available PCI slot on
the motherboard. Check with
A
your computer manufacturer
for instructions.
C
Slide the PCI Adapter into the
PCI slot. Make sure that all of its
pins are touching the slot's
contacts. You may have to
apply a bit of pressure to slide
the adapter all the way in. After
the adapter is firmly in place,
secure its fastening tab to your
C PC's chassis with a mounting
screw. Then, close your PC.
D
Attach the external antenna to
the adapter's antenna port.
E
Power on your desktop PC.

Connect the Adapter

Connecting
the Adapter
Installing the
Adapter
Positioning
Proceed to Step 3.
the Antenna