The Automatic Sleep Feature; Using Your Buzzclip In Wet Winter Weather; Charging Your Buzzclip - iMerciv BuzzClip Quick Start Manual

The Automatic Sleep Feature:

1. The BuzzClip has a built-in automatic sleep feature to conserve battery and
to reduce irritation for when remaining a fixed distance away from a person
or obstacle.
2. For example, if you were having a conversation with someone face to face,
you would be within 1 or 2 meters of each other, meaning the BuzzClip
would be vibrating constantly while you are conversing.
3. The automatic sleep feature activates when you are a fixed distance away
from a person/object for longer than 5-7 seconds.
4. After 5 to 7 seconds of being a fixed distance away from something (i.e. you
are not moving and neither is the obstacle/person), the BuzzClip will stop
vibrating and is now in the 'sleep mode'.
5. As soon as you or the person/object begins to move more than 10 cm, the
BuzzClip will kick back into gear and start detecting and vibrating again.

Using your BuzzClip in Wet Winter Weather:

1. The BuzzClip is water resistant. It will function perfectly in light rain. Don't
go swimming with it though!
2. If rain drops land directly into the sensor, the rain may create a film of
water in the sensor's mesh. The unit may stop functioning temporarily.
Simply wipe or shake the water off the sensor and it should be good to go!
3. The BuzzClip can function in extreme cold conditions (-30°C)

Charging your BuzzClip

The BuzzClip's battery will easily last up to 10 hours under rigorous use and can be
charged using a standard Micro-USB cable. The battery does not require a
replacement for at least 3 to 5 years (depending on use).
To Charge your BuzzClip: