Hdmi Interface; Gps Interface - Lark FreeCam 5.0FHD-GPS User Manual

Using the device
PC Camera Mode
In the power-on/off state, connect the device with PC with USB data cable, then the screen will display the U disc
mode of "Memory", the network camera mode for "Camera" and possible continuous videoing for "Video". Press the
UP/DOWN key and then the REC key to confirm.

HDMI Interface

The car recorder has HDMI digital video and sound passing interface to transmit the high-quality audio and video
signals to STB, DVD palyer, PC, TV game, integrated amplifier, digital sound and TV set.
Connect HDMI line linked with TV set to HDMI interface of car recorder, and the video output of car recorder will
automatically switch to TV set.

GPS Interface

Put the GPS module into the relative socket of the main engine which is near the USB pedestal.
After the car DVR completes the power-on procedure, the left upper corner of the screen will display the icon
of satellite . There will be a flashing satellite icon if the main engine boots up normally. And this means GPS can't
receive satellite positioning. When the satellite icon stops flash, the GPS can work now.
7