Using The Device; Using Microsd Card - Lark FreeCam 5.0FHD-GPS User Manual

Using the device

Using microSD card

1. Insert your card into the microSD slot until it clicks into place.
2. To remove the microSD card, press the card lightly; it will eject partially allowing you to pull the card out.
3. With no card in the microSD slot, the screen presents " No card" message.
NOTE:
1. The microSD card can be inserted in one way only. Attempts to insert it in any other way may damage the device.
2. The device will automatically set the memory card as the default destination for storing files.
Charging
The device has a built-in rechargeable battery that has to be charged fully after having been used up for the first
three times so that the maximum capacity of the battery can be activated. Charging time: hours
1. Connect the device to a computer/laptop via USB
2. Connect the device to power outlet using the adapter included in the set.
CAUTION:
When the battery gets fully exhausted the device will enter a protection state. Please, charge the battery for at least 10 minutes to
make sure you can turn on the device again.
4
6 .