Table of Contents
Advertisement
4 Trouble Shooting
1 There is something in front of the camera lens.
Is the camera broken?
A: The camera is not broken. It's an IR-cut filter.
When the camera is powered on, the IR-cut will be
reset and cover the lens. Only when the camera is
powered off, the IR-cut will be at a random place
.
2 The camera controller is not working anymore.
A: Most likely, no SD card has been inserted in the
camera when it is turned on. Please make sure a
working SD card has been inserted in the camera
before it is turned on.
3 The display screen is suddenly black.
A: To reduce power consumption, the camera will
shut down automatically after 3 minutes if no
operation is done. Please turn on the power again if
you want to continue to work with the control.
Page 12
Advertisement
Table of Contents
