Advertisement
Quick Links
Advertisement
Related Manuals for Boly Media UNI CAM 3.1
Summary of Contents for Boly Media UNI CAM 3.1
- Page 1 UNI CAM 3.1 3.1 Mega Pixel Digital Camera User’ s Manual Version 1.0...
- Page 2 UNI CAM 3.1 Digital Camera Overview and Acknowledgments Thank you for purchasing UNI CAM 3.1 Digital Camera. It is with 1.5’ TFT LCD Display, built-in Flash Light and 3X Digital Zoom. Maximum resolution is 2048 x 1536. Supports Snap Shoot, Video Recording and Voice Recording.
-
Page 3: Inside The Package
User’s Manual UNI CAM 3.1 Digital Camera Inside the Package 1 x UNI CAM 3.1 Digital Camera 2 x AA Re-chargeable Battery 1 x Tripod 1 x Video Cable 1 x USB Cable 1 x CD ROM with Driver and Application Software... -
Page 4: Specification
User’s Manual UNI CAM 3.1 Digital Camera Specification Sensor 2.0 Mega Pixel CMOS Sensor Resolution Maximum 3.1 Mega Pixel (2048 x 1536) Hardware Interpolation LCD Display 1.5” TFT Storage Media Secure Digital (SD) Memory Card Photo Quality 2048 x 1536 Fine... - Page 5 User’s Manual UNI CAM 3.1 Digital Camera Digital Camera Illustrations 1. Shutter Button 2. Flashlight 3. View-Finder 4. Self-Timer Indicator 5. Camera Len 6. Macro Mode 7. Microphone 8. Normal Mode 9. Tripod Fix 10. Strap Hole Front View 11. Battery & Memory Card Compartment 1.
-
Page 6: Operation Instructions
User’s Manual UNI CAM 3.1 Digital Camera Operation Instructions Batteries Loading the Batteries Make sure the camera is turned off. Open the Battery and Memory Card Compartment by sliding the lock. Follow the illustration to insert the batteries in the direction shown. - Page 7 User’s Manual UNI CAM 3.1 Digital Camera Inserting / Removing the Memory Card (Secure Digital) Make sure the camera is turned off. Open the Battery and Memory Card Compartment by sliding the lock. Inset the card as far as it will go in the direction shown at the back of the camera.
- Page 8 User’s Manual UNI CAM 3.1 Digital Camera Taking Still Pictures Shooting Photos Point the camera towards a subject while viewing through the Viewfinder or the LCD Display. Press the Shutter Button gently to take a picture. The picture will remain on the LCD Display until it is stored in the memory card as JPEG format.
- Page 9 User’s Manual UNI CAM 3.1 Digital Camera Flashlight Setting Press the Flash Button to select one of the 3 flashlight options as below. Flashlight Off Automatic Always Fires Flashlight Off : Default flashlight setting is at off condition. No flashlight is available.
- Page 10 User’s Manual UNI CAM 3.1 Digital Camera Macro Mode Slide the Macro Mode Switch to Macro Mode. It allows you to take pictures at a closer range (around 20cm). To take pictures, follow the steps in Shooting Photos. Digital Zoom While focusing a subject, press Zoom-In / Zoom-Out Button to access Zoom feature.
- Page 11 User’s Manual UNI CAM 3.1 Digital Camera Viewing Still Pictures / Playing Back Video Press Menu Button and go to Preview Image. Press OK Button. In preview mode, you will see a 3x2 photo album. Select your desired viewing picture / playing back video by pressing Previous Button / Next Button.
- Page 12 User’s Manual UNI CAM 3.1 Digital Camera Voice Recording Start Recording Voice Press Menu Button and go to Digital Voice. Press OK Button. To start voice recording, press Shutter Button. Timer starts counting recording time. To stop, press again the Shutter Button. The recorded voice will be saved as WAV format in the memory card.
- Page 13 User’s Manual UNI CAM 3.1 Digital Camera Connecting with Your TV / VCR Connect the black plug of the Video Output Cable into the Video Output Port on the camera. Connect the yellow plug of the Video Output Cable to the Video-in Plug on your TV / VCR.
- Page 14 User’s Manual UNI CAM 3.1 Digital Camera Driver & Software Application Installation Driver Installation 1. Close all working programs before installing the driver, and do NOT connect the camera with the computer. 2. Insert the CD driver into the CD-ROM drive.
- Page 15 User’s Manual UNI CAM 3.1 Digital Camera Transferring Files Downloading Files from Camera Connect the camera with the computer through USB cable. A Image Download Utility window (as above) will be pop-up. You can download the files from the camera to the computer by using this utility.
- Page 16 User’s Manual UNI CAM 3.1 Digital Camera Software Application Installation : LOVER’S EYE 2.0 1. Close all working programs before installing the driver, and do NOT connect the camera with the computer. 2. Insert the CD driver into the CD-ROM Drive.