Features - Logicube OmniClone Xi User Manual

INTRODUCTION
Logicube OmniClone® Xi User's Manual
are in common use. Among those are FAT16,
FAT32, and NTFS.
FAT16 – The file system used by DOS since
version 3.3. This file system can be a maximum
size of 2GB, and can be used under Windows NT,
95, 98, ME, and 2000. FAT is the acronym of File
Allocation Table, with entries that are 16 bit wide,
hence the FAT16 name.
FAT32 – Supported by Windows 98, ME, 2000, and
XP. Entries in the FAT are 32 bits each thus
eliminating the 2GB limit and offering improved
space efficiency.
NTFS – Supported by Windows NT, 2000, XP,
Vista,and 7. Offers improved access speed, and
some security and recoverability features.
The Logicube OmniClone Xi is "aware" of the above
three file systems and will clone them over
"intelligently".

Features

Clones any IDE, EIDE (PATA) or Serial ATA
Drive.
Data transfer rates in excess of 3.5 GB/min.
Master and Target drives can be of different
size, make and model.
Master drive can contain up to 24 partitions.
Easy to read graphical interface.
Calibrated touch screen for fast input of
settings and data.
Light Bar and buzzer show unit status and
alert operator of any errors.
Automatically scales FAT16/32, NT
4.0/5.0/6.0, and Windows 2000/XP, Vista,
and 7 partitions.
USB port connectivity for the compact Flash.
Optional diagnostics software for drive
scanning and repairing, data recovery, and
Department of Defense (DoD) specification
data wiping.
User-replaceable drive station modules and
power supply for ease of maintenance.
Removable Compact Flash (CF) Drive.
2