Removal Of Cassette Tape - Panasonic NV-SJ422EE Service Manual

facing the connector contacts.

2.2. REMOVAL OF CASSETTE TAPE

There are 2 ways to remove a cassette tape.
1. Service Information Display Operation
A. Press the FF and EJECT keys simultaneosly for 3 seconds and set the Service Mode 7.
B. Press STOP key in order to rotate the Loading Motor for unloading operation. (Pay an attention of tape slack)
2. Manual Operation
A. Disconnect the AC Mains Lead and remove the Top Panel.
B. Rotate the Main Cam Gear clockwise until the Loading Posts move to fully unloaded position as shown in
(Tape is remaining)
C. Rotate the Capstan Motor clockwise from the bottom side to take up the tape.
D. Rotate the Main Cam Gear clockwise until the cassette tape is ejected.
http://cxema.ru
Fig. S9
Fig. S10
Fig. S11
Fig. S10.