Checking Of Main C.b.a; Flat Card Cable Installation - Panasonic NV-SJ422EE Service Manual

5. install the Cylinder Stator Unit.
6. Tighten 2 screws (A).
7. Confirm the PG SHIFTER ADJUSTMENT with the alignment tape (PAL: VFJ8125H3F) and adjust it if necessary.

2.1.3. CHECKING OF MAIN C.B.A.

When servicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanism from the frame and turn over.

2.1.4. FLAT CARD CABLE INSTALLATION

When installing the Flat Card Cable on the connector, install the Flat Card Cable with the cable contacts
http://cxema.ru
Fig. S6
Fig. S7
Fig. S8