Do you have a question about the SBNB500 and is the answer not in the manual?
Questions and answers
JESUS ALBERTO ITUARTE CAMACHO
March 18, 2025
como reponer la bateria del smartbitt snb800
1 comments:
Mr. Anderson
May 14, 2025
To replace the battery of the Smartbitt SBNB500:
1. Obtain the correct replacement: Use an AJC® Replacement Battery part # AJC-D5S, 12V 5Ah, maintenance-free sealed lead-acid type.
2. Reuse existing parts: You must reuse your existing cabling and hardware. These replacement batteries do not include cables or connectors.
3. Safety and preparation: Turn off the UPS and unplug it from the power source. Ensure the unit is in a dry, well-ventilated area below 40°C and 90% humidity.
4. Open the UPS casing: Carefully open the battery compartment.
5. Remove the old battery: Disconnect the cables from the old battery and remove it.
6. Install the new battery: Connect the cables to the new battery, ensuring correct polarity, and fit it securely in the compartment.
7. Close the casing: Securely close the battery compartment.
8. Charge the battery: Plug the UPS into an AC outlet and charge the battery for at least 8 hours before first use.
Always verify the battery specifications match your unit before replacement.
Need help?
Do you have a question about the SBNB500 and is the answer not in the manual?
Questions and answers
como reponer la bateria del smartbitt snb800
To replace the battery of the Smartbitt SBNB500:
1. Obtain the correct replacement: Use an AJC® Replacement Battery part # AJC-D5S, 12V 5Ah, maintenance-free sealed lead-acid type.
2. Reuse existing parts: You must reuse your existing cabling and hardware. These replacement batteries do not include cables or connectors.
3. Safety and preparation: Turn off the UPS and unplug it from the power source. Ensure the unit is in a dry, well-ventilated area below 40°C and 90% humidity.
4. Open the UPS casing: Carefully open the battery compartment.
5. Remove the old battery: Disconnect the cables from the old battery and remove it.
6. Install the new battery: Connect the cables to the new battery, ensuring correct polarity, and fit it securely in the compartment.
7. Close the casing: Securely close the battery compartment.
8. Charge the battery: Plug the UPS into an AC outlet and charge the battery for at least 8 hours before first use.
Always verify the battery specifications match your unit before replacement.
This answer is automatically generated