Table Of Contents - Kenwood RXD-V525 Service Manual

RXD-V525/V626/V727/V828
CONTENTS / ACCESSORIES / CAUTIONS
Contents
CONTENTS / ACCESSORIES /CAUTIONS.............. 2
EXTERNAL VIEW .......................................................3
CIRCUIT DESCRIPTION ............................................4
ADJUSTMENT ..........................................................10
WIRING DIAGRAM ...................................................12
Accessories
FM indoor antenna (1)
(T90-0836-05)
Batteries (R6/AA) (2)
Remote control unit (1)
(A70-1302-05): RC-V828...RXD-V828
(A70-1303-05): RC-V727...RXD-V727
(A70-1304-05): RC-V626...RXD-V525/V626
System configuration
SYSTEM MAIN UNIT
XD-V525 RXD-V525
XD-V525 RXD-V525
XD-V626 RXD-V626
XD-V727 RXD-V727
XD-V828 RXD-V828
Cautions
Operation to reset
The microcomputer may fall into malfunction (impos-
sibility to operate, erroneous display, etc.) when the
power cord is unplugged while power is ON or due to
an external factor. In this case, execute the following
procedure to reset the microcomputer and return it to
normal condition.
2
AM loop antenna (1)
(T90-0837-05)
Speaker cords (2)
Provided in the speaker package
DESTINATION SPEAKER
MI LS-N452
V LS-N552
MI LS-N552
MIV LS-N752
LS-N552
MIV
CRS-N552
PC BOARD .............................................................. 13
SCHEMATIC DIAGRAM .......................................... 24
EXPLODED VIEW ....................................................51
PARTS LIST..............................................................55
SPECIFICATIONS ....................................................67
AC plug adaptor (1)
(E03-0115-05)
Use to adapt the plug on the power cord to
the shape of the wall outlet.
(Accessory only for regions where use is
necesary.)
Video cord(1)
(E30-1427-05)
Battery cover (A09-0399-08)
SP CORD PARTS NO.
E30-5535-05
E30-5535-05
E30-5535-05
E30-5535-05
E30-5559-05
E30-5535-05
E30-5542-05
Unplug the power cord from the power outlet
then, while holding the ENTER key depressed,
plug the power cord again.
ENTER
÷ Please note that resetting the microcomputer clears the
contents stored in memory and returns it to the condition
when it left the factory.