White Balance Adjustment; Circumference Convergence Adjustment - Changhong Electric 21NF55 Service Manual

obtained.

2.2 Circumference convergence adjustment

2.2.1 Loosen the clamp screw holding the deflection yoke assembly and allow it tilting.
2.2.2 Temporarily put the first wedge between the picture tube and deflection yoke assembly. Move
front of the deflection yoke up or down to obtain better convergence in circumference. Push the
mounted wedge in to fix the yoke temporarily.
2.2.3 Put the second wedge into bottom.
2.2.4 Move front of the deflection yoke to the left or right to obtain better convergence in
circumference.
2.2.5 Fix the deflection yoke position and put the third wedge in either upper space. Fasten the
deflection yoke assembly on the picture tube.
2.2.6 Detach the temporarily mounted wedge and put it in either upper space. Fasten the deflection
yoke assembly on the picture tube.
2.2.7 After fastening the three wedges, recheck overall convergence and ensure to get optimal
convergence. Tighten the lamp screw holding the deflection yoke assembly.
BLU
Red
4-pole Magnet Movement
Movement
Incline the Yoke up (or down)

3. White Balance Adjustment

Generally, white balance adjustment is made with professional equipment. It' s not practical to get
good white balance only through manual adjustment. For TVs with I
data to adjust white balance.
SERVICE MANUAL
BLU Red
GRN
Center Convergence by Convergence Magnets
Circumference Convergence by DEF Yoke
Red/BL
U
Incline the Yoke Right(or left)
Fig. 3
2
7
Red/BLU
6-pole Magnet
C bus control, change the bus