Toshiba RD-XV48DTKB Owner's Manual page 28

E3NG1BD_EN.book Page 28 Thursday, April 24, 2008 3:34 PM
Select a Channel
You can select a channel using
[the Number buttons].
e.g.) 6 ch: Press [6], then wait for 2 seconds or
press [0], [0], [6].
15 ch: Press [1], [5], then wait for 2 seconds or
press [0], [1], [5].
You can also select a channel using
[PROG. G \ H].
• You can only select channels 1 to 999.
• Analogue channels will be stored in channel 901-
999 and DVB channels will be stored in channel 1-
900 after it is scanned by this unit.
To switch DVB, analogue and external input (AV1/
AV2/AV3/DV(AV4)) mode.
You can switch between DVB, analogue and external
input (AV1/AV2/AV3/DV(AV4)) mode by pressing
[INPUT SELECT F] repeatedly. The mode changes
as follows:
DVB mode Analogue mode
• You can also switch the mode by using
[PROG. G \ H].
• You can select any DVB channels using
[the Number buttons] when you are in analogue or
external input (AV1/AV2/AV3/DV(AV4)) mode.
• You can select any analogue channels using
[the Number buttons] when you are in DVB mode.
28
EN
Quick Select
With "Quick select" menu, you can select your
favourite DVB channel quickly. Refer to "Edit Group
Lists" on page 29.
AV1 AV2 AV3 DV(AV4)
DVB
1
Press [ENTER/OK] while watching a
DVB channel.
• "Quick select" menu will appear.
Quick select
All
S. No. Channel name
1
Moving picture 576i
2
ITV1
3
ITV2
4
ITV3
5
Channel
6 E4
7
More 4
2
Press [L \ P] to select your favourite
group list. ("All", "Group1" -
"Group8")
• "All" shows a list of all the memorised DVB
channels.
• If the favourite group does not have any
channels, the group will be skipped.
3
Select the DVB channel you want to
watch using [U \ D], then press
[ENTER/OK].
4
Press [RETURN/BACK] to exit.