Charging A Battery - haibike XDURO Owner's Manual

High Power HP0180WL3 Battery Charger
72 72
High Power HP0180WL3 Battery

Charging a battery

1. Plug the battery charger into the
battery (charge cord).
2. Plug the battery charger into the
wall outlet (power cord).
3. The charger will begin to charge
the battery. Refer to the "Charge
indicator LED" table below for
details.
If the charger is plugged into the wall before being plugged into the battery, it will not
be able to sense the battery, and will not charge
Charge indicator LED
LED
Flashing amber
Steady amber
Flashing green
Steady green
Flashing red
Appendix D
Charger
After charging...
STATUS
Pre-charge
CC mode
CV mode
Charge complete
Abnormal
1. Disconnect the power cord from
the wall, or from the back of the
charger.
2. Disconnect the charge cord from
the battery pack.
MEANING
Charger is pre-conditioning the battery.
Charging at constant current (4A).
Charging at constant voltage (battery
is ~80% full).
Battery is fully charged.
Battery is not being sensed properly.
Charging a battery Charging a battery
C
H