Headset, Handlebar, Seat Area - haibike XDURO Owner's Manual

Fastener Torque Specifications
70 70
Fastener Torque Specifications
Correct tightening torque of threaded fasteners is very important to your safety. Always
tighten fasteners to the correct torque. Bolts that are too tight can stretch and deform.
Bolts that are too loose can move and fatigue. Either mistake can lead to a sudden
failure of the bolt.
Always use a correctly calibrated torque wrench to tighten critical fasteners on your
bike. Carefully follow the torque wrench manufacturer's instructions on the correct way
to set and use the torque wrench for accurate results.
In case of a conflict between the instructions in this manual and information provided
by a component manufacturer, consult with your dealer or the manufacturer's customer
service representative for clarification.
COMPONENT

Headset, Handlebar, Seat area

Seat fixing bolt (seat rail binder)
Stem handlebar binder bolts (2)
Stem wedge (binder) bolt – quill type for
threaded headset
Threaded headset locknut
Threadless stem clamp bolts
Crankset, Bottom Bracket, Pedal area
Chainring bolt (aluminum)
Chainring bolt (steel)
Crank bolts
Pedal (into crank)
Derailleur, Shift lever area
Front derailleur cable pinch
Appendix C
RECOMMENDED TORQUE VALUE
174–347
174–260
174–260
130–150
120–144
44–88
70–95
305–391
307–350
44–60
IN–LB
19.7–39.2
19.7–29.4
19.7–29.4
14.7–16.9
13.6–16.3
5.0–9.9
7.9–10.7
34.5–44.2
34.7–39.5
5.0–6.8
NM
C
A