Specifications; Mounting - HEIDENHAIN ND 1200 QUADRA-CHEK Installation Instructions Manual

ND 1200 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de

4. Specifications

The ND 120x QUADRA-CHEK is an advanced evaluation unit for performing 2, 3 and 4
axis measurements at very high levels of precision and accuracy. This unit is designed for
indoor use only. The ND 120x components shall only be installed as described in these
instructions. Mounting, installation and maintenance are to be performed by qualified
personnel only.
Power input:
Replaceable fuse:
Environmental conditions
Operating temperature:
Storage temperature:
Relative humidity:
Altitude:
Protection:
Overvoltage category:
Pollution degree:
Mass:

5. Mounting

The following items are included with the product:
• Power cord
• Stand or mounting adapter
• 2-D demo part
• ND 1200 QUADRA-CHEK Installation Instructions
The following accessories are available for this product:
• 2-D demo part, ID 681047-02
• Foot switch, ID 681041-01
• Remote keypad, ID 681043-01
• Fiber-optic cable, ID 681049-xx
• Holder, ID 681050-xx
• Fiber-optic cable connector, ID 681049-xx
• Stand, ID 382892-02
• Mounting adapter, ID 682419-01
• Protective cover, ID 681051-0x
Refer to " Accessories and connector pin assignments" on page 116 for additional
information. Refer to the instructions provided with an accessory for additional
information.
Do not mount in a position that makes it difficult to access the power switch or
power cable.
AC 100 V ... 240 V (-15 % ... +10 %)
50 Hz ... 60 Hz (±3 Hz)
(max. 100 W)
T 1.6 A / 250 V, 5 mm x 20 mm
Quantity: 2
0 °C ... 45 °C
-20 °C ... 70 °C
† 80 %
† 2000 m
IP00, front panel IP40
II, equipment intended to be supplied from the building
wiring
2
ND with stand: approx. 4.8 kg
ND with mounting adapter: approx. 2 kg
13