Panasonic NV-FJ610PMP Operating Instructions Manual page 31

≥Alternatively, you can set the category on
the Navigator list. (See page 34 for details.)
≥This function is activated when JET
NAVIGATOR is set to ON. (See page 21.)
When JET NAVIGATOR is set to OFF,
proceed to the step 8.
7 Press MENU to make
the previous display
appear.
8 To activate timer
recording, press TIMER Á.
≥When JET NAVIGATOR is set to ON, the
[PROGRAM IS COMPLETED REMAINING
PROGRAM 49] message appears.
(See page 21.)
≥When JET NAVIGATOR is set to OFF, the
[PROGRAM IS COMPLETED] message
appears. (See page 21.)
≥The VCR will be set to the timer recording
standby mode after about 1 minute if
TIMER Á is not pressed.
Weekly Timer Recording
In step 3, select the desired day by pressing
DATE s.
For example, SU (Sunday)
(SUuSunday, MOuMonday, TUuTuesday,
WEuWednesday, THuThursday, FRuFriday,
SAuSaturday)
Daily Timer Recording
For this timer function, several groups of days
can be selected.
A Daily recording from Monday to Friday
(MO–FR)
B Daily recording from Monday to Saturday
(MO–SA)
C Daily recording from Sunday to Saturday
(SU–SA)
In step 3, select the desired days by pressing
DATE s.
For example, C
Timer Recording from an
External Signal Source
CH DATE ON OFF
2 27SA 2 0 : 0 2 2 1 : 3 0 SP
If timer recording is performed by a unit
connected to the audio/video input sockets,
CHECK : PROG./CHECK
select the AV input indicator in step 2 for the
program position.
Setting other Programs in
Succession
Repeat steps 1–8.
Selecting the Desired Tape
Speed
Press SPEED to make the selection in any of
steps 1–5.
CH DATE ON OFF
2 SU – – : – – – – : – – SP
CATEGORY :
1
Programming a Timer
Recording of a TV Program Until
its End
(Auto SP/EP Change Function )
If, during a timer recording performed in the SP
mode, the VCR determines that the remaining
tape time is insufficient to record the program
to its end, the Auto SP/EP Change function
automatically changes the tape speed to EP to
ensure that the whole program will be recorded.
Depending on the remaining tape length,
recording may be performed in the EP mode
from the start. However, if the remaining tape
time is still not sufficient in this case, the
program cannot be recorded to the end.
CH DATE ON OFF
2 SU-SA – – : – – – – : – – SP
CATEGORY :
1
CH DATE ON OFF
A2 – – – – – – : – – – – : – – SP
CATEGORY :
1
CH DATE ON OFF
2 27SA 2 0 : 0 2 2 1 : 3 0 EP
CATEGORY :
1
31