Connecting The Vcr To A Tv - Panasonic NV-FJ604 Series Operating Instructions Manual

Connecting the VCR to a TV

Method 1.
AC Input
socket
AC Mains lead
(supplied)
After completing the above connections, proceed to the Auto Setup page (Page 8).
or Method 2.
AC Input
socket
AC Mains lead (supplied)
After completing the above connections, proceed to the Auto Setup page (Page 9).
If you are connecting your VCR to a TV using RF coaxial cable and 21-pin Scart cable, then
follow the steps below. (AV Connection)
21- Scart cable to AV1
(not supplied)
RF Coaxial cable (supplied)
≥ Must be connected to
watch TV channels even
if 21-pin Scart cable is
used to connect VCR to
TV.
If you are connecting your VCR to a TV using only RF coaxial cable, then follow the
steps below. (RF Connection)
Aerial (not supplied)
Aerial lead
(not supplied)
Aerial Input
socket
Aerial (not supplied)
Aerial lead
(not supplied)
Aerial Input
socket
RF Coaxial cable (supplied)
≥ Must be connected to
watch TV channels.
TV (not supplied)
21-pin Scart
socket
To AC Mains
socket
TV (not supplied)
To AC Mains
socket
7