Editing When Not Using An Edit Cable - Panasonic NV-DV2000EC Operating Instructions Manual

Editing when Not Using an Edit Cable

To connect a VCR or Video Movie Camera without an Edit socket and use the NV-DV2000 as the Recording VCR.
DIGITAL VCR
Preparations
≥ Complete necessary connections and settings.
[R28–35]
≥ Connect the AV1 socket on the NV-DV2000 to the TV.
≥ Connect the AV2 socket or the AUDIO/VIDEO/S-
VIDEO IN (AV3/AV4) sockets on the NV-DV2000 to
the playback unit.
Set INPUT SELECT on this VCR as follows:
A2: Through the AV2 socket
A3: Through the AV3 sockets
A4: Through the AV4 sockets
≥ If the playback unit has a DV terminal, connect to the
DV1 or DV2 on the NV-DV2000 with a DV cable.
Operations
1 Using the controls on the playback unit, search for
the edit start point, and then pause the playback.
2 Press JOG/SHUTTLE on the recording VCR, and
check that the button is lit.
3 Search for the edit start point.
4 Press the button for the editing mode on the
NV-DV2000.
To copy the contents of the tape in the playback
unit as is: Press ¥ (REC).
To insert picture: Press VIDEO INSERT.
To insert sound: Press AUDIO INSERT.
To insert picture and sound: Press VIDEO INSERT
and then press AUDIO INSERT(or vice versa).
To add new sound: Press AUDIO DUB.
For Audio Mixing: Press AUDIO DUB and then
press MIXING EDIT on the front panel.
≥ The Audio Mixing procedure differs in part from
other editing operations. [R42]
4
OK
4 6
2
3
5
5 Press ;/D (PAUSE/SLOW) on the NV-DV2000 and
start playback on the playback unit simultaneously.
≥ Editing begins.
6 Press ∫ (STOP) on the NV-DV2000, and then
press STOP on playback unit to stop editing.
Notes:
¡ Although Copying can be performed in LP mode,
Insert and Audio Dubbing cannot be performed with a
tape recorded in LP mode. It is necessary to first
copy the tape in SP mode.
¡ Video Insert and Audio Insert are not possible in
the following cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
¡ AV Insert, Audio Dubbing and Audio Mixing are
not possible in the following cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV1 or DV2.
¡ If the time display on the NV-DV2000 is set to tape
counter mode during editing, the NV-DV2000 stops
the editing operation automatically when the counter
reaches "0:00.00".
(This function does not work when using the Copying
or Audio Dubbing functions.)
39