One-Touch Audio Mixing - Panasonic NV-DV2000EC Operating Instructions Manual

One-Touch Audio Mixing

This function is used to mix the audio on STEREO1, which has already been recorded, with audio from a external
recording source (A2, A3 or A4), and record the result on STEREO2.
This function is useful for adding new audio, such as music or a narration, to the original audio which has already
been recorded.
DIGITAL VCR
7
Preparations
≥ Confirm that the TV is on and the VCR viewing
channel is selected.
≥ Complete necessary connections and settings.
[R28–35]
≥ Set One-Touch-Edit to ON on Edit functions menu.
[R37]
Operations
1 Press JOG/SHUTTLE on the Editing controller, and
check that the button is lit.
2 Search for the edit start point on the
recording VCR.
3 Press AUDIO DUB on the Editing
controller.
≥ The picture from the playback unit
appears on the screen.
4 Press MIXING EDIT.
5 Search for the edit start point on the playback unit.
6 Press JOG/SHUTTLE on the Editing controller.
≥ Editing begins.
≥ If you wish to adjust the volume of the original
audio (STEREO1) and external recording source
(A2, A3 or A4) during Audio Mixing,
AUDIO MIX:
AUDIO REC LEVEL: To adjust the volume of the
ST1 2
ST1 2
≥ To continue editing, press JOG/SHUTTLE on the
Editing controller, and repeat steps 5–6.
7 Press ∫ (STOP) on the Editing controller to stop
editing.
42
3 1,5
¥
DV IN/OUT DV SELECT
AV4
2,5
A DUB
To adjust the volume of the
original audio (STEREO1).
audio from external recording
source (A2, A3 or A4).
dB -¶ 30 20 10 5 0 OVER
L
l l l l l l l l
R
l l l l l l l l l
STEREO AUDIO
< EJECT SERECT OUT
EDIT 8mm CONTROL
1
2
RECORDER EDIT CONTROL
8mm
PLAYER PASSIVE DV EDIT CONTROL MIXING EDIT MIXING EDIT
PRINTER/
D.STILL PICTURE
4
To Monitor the Mixed Audio after Audio Mixing
Press STEREO SELECT during playback and select
STEREO2.
Notes:
¡ Audio Mixing is not possible in the following
cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV1 or DV2.
ST 2
¡ In order to ensure that the editing operation is
ST12
performed properly, the editing points should be set at
least 20 seconds after the beginning of the tape.
¡ When using the Editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 5), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
REW STOP PLAY
STEREO1
AUDIO REC LEVEL
AUDIO MIX
0 10 0 STEREO1 STEREO2 10
SP/LP TBC 3D DNR PRINT
VIDEO L– AUDIO – R
S-VIDEO
6
dB -¶ 30 20 10 5 0 OVER
L
ST 2
l l l l l l l l
R
ST1 2
l l l l l l l l l
FF PAUSE
STILL
ALBUM
¥ REC/OTR
INPUT SELECT
AV4
OUT