Table of Contents
Related Manuals for Logic IO PNM-100
Summary of Contents for Logic IO PNM-100
- Page 1 NMP – User Guide, Version 3.00 Navigation and Messaging Platform User Guide Version 3.00 Page 1 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com...
-
Page 2: Table Of Contents
Sounds........................24 How to install the NMP (optional)................26 How to modify installation for a new device.............26 Probing the device....................27 Troubleshooting......................28 Page 2 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 3: Introduction
Mobile Data Terminal, MDT. This document will describe the installation and use of the NMP, and for information about the usage of the PNM-100 and PNM-200 devices please refer to the Technical Manual for those products. The package contains either an SD card with the application, or a Windows CE device with the application already installed on an SD card. -
Page 4: Features
Support for hardware buttons on supported hardware. Support for status leds on supported hardware. Support for rear view camera on supported hardware. Page 4 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211... -
Page 5: Contents Of Package
Installation configuration • \autorun.exe Launcher application. Moved to the autorun location on the • device when install is run. Page 5 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com... -
Page 6: How To Use The Nmp
MDT power up request. RTCU controls visibility 2 Please notice that the buttons etc. can be changed in the settings, see Menu buttons. Page 6 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211... -
Page 7: Connection Status
These buttons take up space that would otherwise be used for navigation. Butons can be Buttons can Configurable enabled and disabled be hidden color and width Page 7 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark... -
Page 8: Driver Menu
To log in, enter the User ID and password and press next to set the status. Switch between numbers and letters Clear driver and driver status (Hidden by default) Page 8 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 9: Keyboard
The on-screen keyboard looks like this (exact layout is determined by the configuration): Switch between numbers and letters Spacebar Backspace Page 9 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 10: Message Menu
For type 0 and 1, a button is available to write a reply: Page 10 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14... - Page 11 Shows a list of Field to write the predefined message in messages. Page 11 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark...
-
Page 12: Stop Menu
Clicking a stop will mark it as read and make it possible to activate, delete and mark it as done. Delete stop Mark as Navigate to done/not done stop Page 12 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark... - Page 13 The “Details” button makes it posible to disable some types of road (toll road, motorway etc.) and see the progress of the route. Page 13 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211...
-
Page 14: Mobile Data Terminal Menu
To close the MDT menu and remove the button, call mdtPower(power:= false) Turns green when either text messages or stops change. 3 See Online help, MDT section. Page 14 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com... -
Page 15: Updates
NMP starts. 4 See Online help, nmpUpdate and nmpUpdateProgressReceive. Page 15 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211... - Page 16 RTCU unit. Instead an update program runs through several steps before showing the result of the update. The device will restart after a moment, or it can be restarted manually. Page 16 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14...
-
Page 17: How To Configure The Nmp
As a new thing in v2.00, it is now possible to define some settings for specific devices. This makes it possible to use the same configuration for multiple devices. By default, the definitions for the PNM-100 and the PNM-200 devices are included. The device specific settings are placed under the element . -
Page 18: Functionality
Determines if the Stop button is visible. If hidden, functionality needing this button should not be used. 5 See in the on-line help nmpGetHardwareId Page 18 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 19: Hiding Buttons
Mark destination as done. stops.drive Drive to destination. stops.delete Delete destination. stops.deleteall Delete all destinations. user.clear Clear driver. Page 19 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com... -
Page 20: Sound Settings
Determines if debug output is logged. Should not be enabled under normal circumstances. <ShowExit> Displays button in the main menu to exit to the operating system. Page 20 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 21: Time Settings
Russian Standard Time (GMT+03:00) Moscow, St. Petersburg, Volgograd Ekaterinburg Standard Time (GMT+05:00) Ekaterinburg N. Central Asia Standard Time (GMT+06:00) Novosibirsk Page 21 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com... -
Page 22: Themes
7 32-bit value representing the color components alpha, red, green and blue. When viewed as hex, the format is . Alpha should always be (opaque). 0xAARRGGBB 0xFF Page 22 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 23: Translations
Keyboard The following settings can be used to control the keyboard: Page 23 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211... -
Page 24: Waypoint Symbols
.png Sounds The sound files must be stored as PCM encoded files(Waveform Audio File Format). .wav Page 24 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com... - Page 25 : The sound played when stops are received and deleted. • stop.wav : The sound played when the MDT beeps. • mdt.wav Page 25 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com...
-
Page 26: How To Install The Nmp (Optional)
The file name of the autorun program, e.g “Autorun.exe” <file> Besides the autorun program, the configuration for the autorun program will also be placed in the folder. Page 26 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com... -
Page 27: Probing The Device
This information can then be used for determining the correct settings for the device. 8 Please note that the file shown has been truncated to avoid too much redundant data. Page 27 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14... -
Page 28: Troubleshooting
(page 2). After installing an update, it may be necessary to reboot the device for the setting to be set correctly. Page 28 of 28 Logic IO Aps Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com...