Table of Contents
Advertisement
GETTING
STARTED
Step 3c. Digital TV/Cable
Reception
with DTV-Compatible
TV
Follow this diagram
if you have a DTV-compatible
TV, cable service and you want to
receive digital
channels
through the STB and cable
channels
through the cable box
(or through the TV if you have no cable box),
Optional Cable Box
NOTE:
ANTENNA,
CABLE BOX, RF CABLE
AND AUDIO CABLES NOTINCLUDED
DTV-Compatible
TV
DIGITALTV
INPUT
NTSC INPUT
DIGITALTV/CABLE
RECEPTION
WITH DTV-COMPATIBLETV
SETUP
Procedure
Connect the antenna cable to the STB ATSC/DTV INPUT jack.
If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with a coaxial connector.
Connect the cable
box ANT (antenna) OUT jack to the DTV-compatible TV ANT (antenna) IN jack using a RF
cable.
If not using a cable box, connect the cable wire from the wall jack to the DTV-compatible TV
ANT (antenna) IN jack using a RF cable (not shown).
Follow directions in Getting Started section to connect the STB to a DTV-compatible TV.
[]
Advertisement
Table of Contents
