Table of Contents
Advertisement
Unavailable
Channel
Selection
FEATURES
OF THE SET-TOP
BOX
The unavailable
channel
selection
screen is displayed
when you select an unavailable
channel.
The following
is a list of some
possible
situations
where
an unavailable
channel
selection
may occur.
Tuning to a channel that is not transmitting any programs.
Tuning to a channel that stopped broadcasting programs.
[3
The signal strength of the RF signal is insufficient to obtain consistent error free data.
Found
or Not Found
Input Signals
The unavailable
channel
selection
screen
also indicates
whether
the input signal
is
found or not found.
[3
Found signal (FOUND) - The tuner has found a signal, however,
insufficient and/or
erroneous data is being received.
[3
Not Found signal (NOT FOUND) - The tuner has not found a signal, therefore, data cannot
be received.
Displays the channel number.
A channel name and program
number are not displayed.
indicates
Indicates
an
unavailable
channel
was
selected and
the
signal
is
found or not
found.
STB
Identification Number,
Needed
for
service
calls.
(The number shown is an
example only).
Note:
The screen remains displayed for 60 seconds, then is replaced by a blank screen.
[]
Advertisement
Table of Contents
