Mts Broadcast / Tv Stereo System; Audio Mode For Tv Viewing - Panasonic PV 20DF62 Operating Instructions Manual

MTS Broadcast / TV Stereo System

®
Equipped with -TV Noise
Reduction for true MTS
®
reproduction. -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
®
is a registered trademark, and
®
is licensed by Technology
Licensing.
OPEN/CLOSE LIGHT
DSS
FM/TV D V D
CABLE
+
ADD/DLT
AUDIO ANGLE SUB TITLE DISPLAY
TITLE MENU
S E T
ACTION RETURN
+
SKIP PLAY SKIP
ZOOM
PAUSE STOP
SLOW/SEARCH
< Example >
Press AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an "
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
STEREO
SAP
MONO
STEREO
SAP
MONO
AUDIO
STEREO
DISPLAY
SAP
MONO
STEREO
SAP
MONO

Audio Mode for TV Viewing

Press AUDIO to select the desired audio mode as
described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
• "SAP" is selected with first press of AUDIO.
1 2 : 0 0AM
STEREO
SAP
MONO
Press AUDIO
" mark while the selected audio mode is indicated
MTS Stereo and SAP broadcast
1 2 : 0 0AM CH08
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
1 2 : 0 0AM CH08
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possible improvement.
SAP broadcast
1 2 : 0 0AM CH08
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
1 2 : 0 0AM CH08
Normal monaural sound broadcast.
CH08
1 2 : 0 0AM
STEREO
SAP
MONO
Press AUDIO
CH08
1 2 : 0 0AM
STEREO
SAP
MONO
CH08
19