Table of Contents
Advertisement
5.9. OSD Setup
5.9.1. Speaker Setup
1.If the PAV-8000D output is set to 6CH mode.
2. Press "SETUP" to enter menu setting;
3.Select "SPEAKER SETUP" and press Left to enter "SPEAKER SETUP"
4.Set Center and Surround speakers (ON).
5.Set delay time of Center and Surround Speakers
6.Exit "SPEAKER SETUP" Menu.
5.9.2. Setup TV Display
Select "GENERAL" setup and then press "ENTER". Highlight "TV DISPLAY" and press left to enter the TV
Display settings, which contains options that can be chosen and/or configured.
To choose from the listed options, press the [p] or [q] direction buttons to highlight a selected option, then
press "ENTER" to confirm.
5.9.3. Setting the Menu Language
Following the above -mentioned operation, press the "OSD LANG" to select menu language (this system
includes English and Chinese), then press "ENTER" to confirm.
Figure 35. Select On Screen Display Language Screen
Figure 32. System Speaker Setup Screens
Figure 33. System Speaker Setup Screens
Figure 34. System General Setup Screens
17
Advertisement
Table of Contents
