Installing Rear Wheel - BMW S 1000RR Owner's Manual

Roll rear wheel toward rear
out of swing arm while pulling
brake caliper carrier 10 toward
rear until rear-wheel rim can be
guided past it.
NOTICE
The chain sprocket and the
spacer sleeves on the left and
right are loosely inserted in the
wheel. Exercise care during the
removal, in order that the parts
are not damaged or are lost.

Installing rear wheel

WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS and DTC.
Please see the information on
the effect of wheel sizes on the
ABS and DTC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Roll rear wheel on support into
swing arm until brake-caliper
support can be installed.
Mount brake caliper carrier in
guide 11.
9
135
z